ButtWeld Fittings

Product Details:

Stainless Steel 310 / 310S / 310H Buttweld Fittings are a type of fittings made from Stainless Steel 310, 310S, or 310H alloy. These fittings are used for joining or connecting sections of stainless steel pipes or tubes through the process of welding.

Here's a breakdown of the key components and characteristics of Stainless Steel 310, 310S, and 310H:

1. Stainless Steel 310: Stainless Steel 310 is an austenitic stainless steel that contains high levels of chromium and nickel, along with a moderate amount of molybdenum. It offers excellent high-temperature resistance, good corrosion resistance, and high strength.

2. Stainless Steel 310S: Stainless Steel 310S is a low-carbon version of Stainless Steel 310. It has similar properties to Stainless Steel 310 but with improved weldability and reduced susceptibility to sensitization during welding.

3. Stainless Steel 310H: Stainless Steel 310H is a high-carbon version of Stainless Steel 310, specifically designed for high-temperature applications. It provides increased creep resistance and high-temperature strength compared to Stainless Steel 310 and 310S.

Buttweld fittings are commonly used in piping systems where a strong and leak-proof connection is required. These fittings have a beveled end or socket that allows them to be welded directly to the pipe or tube. Some of the commonly used buttweld fittings for Stainless Steel 310, 310S, and 310H include:

1. Elbows: Elbows are used to change the direction of the pipe flow. They are available in different angles, such as 45 degrees and 90 degrees.

2. Tees: Tees are used to create a branch or split the pipe flow into two or more directions.

3. Reducers: Reducers are used to connect pipes or tubes of different diameters, allowing for a smooth transition.

4. Caps: Caps are used to seal the end of a pipe or tube, providing protection and preventing the flow of fluids or gases.

5. Stub Ends: Stub ends are used with lap joint flanges to facilitate easy disassembly for maintenance or cleaning purposes.

Stainless Steel 310 / 310S / 310H Buttweld Fittings are widely used in various industries, including petrochemical, chemical processing, oil and gas, power generation, and high-temperature applications. It's important to consider the specific requirements, dimensions, and standards of the fittings, as they may vary depending on the application and industry regulations. Consulting with a supplier or manufacturer is recommended to ensure the proper selection and installation of these fittings.

Product Details:

Cuni 90/10 Cupro Nickel buttweld fittings are fittings made from Cupro Nickel 90/10 alloy, which consists of 90% copper and 10% nickel. Cupro Nickel 90/10 is highly resistant to seawater corrosion, making it suitable for marine and offshore applications.

Buttweld fittings are used to join or connect pipes in a butt-welding process. They are designed to provide a strong, leak-proof, and permanent connection. Common types of Cupro Nickel 90/10 buttweld fittings include:

1. Elbows: These fittings are used to change the direction of a pipe, typically in 90 or 45-degree angles.

2. Tees: Tees have an inlet and two outlets, forming a T-shape. They are used to branch off or combine the flow of fluid in a piping system.

3. Reducers: Reducers are used to connect pipes of different sizes, allowing for a smooth transition between sections with varying diameters.

4. Caps: Caps are used to close off the end of a pipe, providing protection and preventing the flow of fluid.

5. Stub Ends: Stub ends are used in combination with lap joint flanges for easy disassembly or rotational flexibility in piping systems.

Cuni 90/10 Cupro Nickel buttweld fittings are available in various sizes, schedules (wall thickness), and configurations to suit different piping requirements. When selecting these fittings, it's important to consider factors such as the specific application, pressure rating, and compatibility with the piping system.

To obtain Cuni 90/10 Cupro Nickel buttweld fittings, you can reach out to specialized suppliers, manufacturers, or distributors of CuNi products. They will be able to provide you with a range of fittings and assist you in selecting the appropriate fittings for your application.

Product Details:

Stainless Steel 304, 304L, and 304H are commonly used austenitic stainless steel grades. They offer excellent corrosion resistance, high strength, and good formability, making them suitable for a wide range of applications. Butt weld fittings made from these stainless steel grades are commonly used in piping systems for their reliability and durability.

Here's a breakdown of each grade and its characteristics:

1. Stainless Steel 304: It is the most widely used stainless steel grade and contains 18% chromium and 8% nickel. It offers good corrosion resistance in various environments and is suitable for most general-purpose applications. Stainless Steel 304 butt weld fittings are commonly used in industries such as food processing, chemical processing, and architectural applications.

2. Stainless Steel 304L: This low-carbon variation of 304 stainless steel offers improved weldability and eliminates the risk of sensitization, which is the formation of chromium carbides at grain boundaries that can reduce corrosion resistance. Stainless Steel 304L butt weld fittings are often used in applications where welding is required, such as in piping systems.

3. Stainless Steel 304H: It is a high-carbon version of 304 stainless steel designed for high-temperature applications. The increased carbon content provides enhanced high-temperature strength and creep resistance. Stainless Steel 304H butt weld fittings are commonly used in applications such as pressure vessels, heat exchangers, and steam boilers.

Butt weld fittings are used to connect pipes and other components in a piping system by welding. They offer a leak-proof and reliable connection. Common types of butt weld fittings include elbows, tees, reducers, caps, and stub ends.

When selecting butt weld fittings made from Stainless Steel 304, 304L, or 304H, it's important to consider the specific requirements of your application, such as the operating temperature, pressure, and the type of fluid or gas being transported. Consulting with a qualified engineer or a stainless steel supplier can help ensure you choose the appropriate fittings for your needs.

Product Details:

The Satya Steel India Stainless Steel SS304 3D Elbow Long is a specific type of pipe fitting used in piping systems. It is made from stainless steel grade SS304, which is a commonly used austenitic stainless steel alloy known for its excellent corrosion resistance and versatility.

Here are some key features and properties of the Stainless Steel SS304 3D Elbow Long:

1. Material: The elbow is made from SS304 stainless steel, which contains chromium and nickel as its main alloying elements. This grade provides good resistance to corrosion, oxidation, and high-temperature environments.

2. 3D Elbow: The term "3D" refers to the radius of the bend in the elbow. A 3D elbow has a larger radius compared to a standard 90-degree elbow, resulting in a smoother flow path and reduced pressure drop in the piping system.

3. Long Length: The "long" designation indicates that the elbow has a longer radius and length compared to standard elbows. This can be beneficial in certain applications where a longer radius is required for proper flow dynamics or to accommodate space restrictions.

4. Corrosion Resistance: SS304 stainless steel provides excellent corrosion resistance, making it suitable for various industrial and corrosive environments. It resists corrosion from acids, alkalis, chemicals, and atmospheric conditions, making it a versatile choice for different applications.

5. Versatility: The SS304 3D Elbow Long can be used in a wide range of industries and applications, including petrochemical, chemical processing, oil and gas, food processing, pharmaceuticals, and more. It is compatible with various fluids, gases, and materials commonly found in these industries.

6. Weldability: SS304 stainless steel offers good weldability, allowing for easy and reliable installation. It can be welded using common techniques such as TIG (Tungsten Inert Gas) or MIG (Metal Inert Gas) welding.

Satya Steel India is a supplier or manufacturer of stainless steel products, including pipe fittings like the SS304 3D Elbow Long. As with any specific product, it is always recommended to refer to the manufacturer's specifications, certifications, and guidelines to ensure it meets the required standards and compatibility for your specific application.